I have read about vacuuming out the 3 reburn air tubes to remove ashes in the F500 V1. Could I put a shop vac hose on the blower/exhaust port of the vacuum and put it in the 3 inch air inlet in the back of the stove to blow out the tube's instead of vacuuming them out?
F500 V1 question
- Thread starter onthescantic
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Vacuum off the surface, but it's mostly for cosmetics. The reburn tubes don't suck in air, they blow out secondary air as the vacuum in the firebox increases, when the primary air is cut back.
