First burn of the season

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
bbfarm

bbfarm

Minister of Fire
Jan 2, 2012
708
wisconsin
Always nervous that something will go wrong after the full tear down and clean, but shes chugging away. A little stinky since the firebox paint job is curing but not bad
 
Better luck than I had. Had the Bixby running good but wanted to do a winter tear down of it and was 19 degrees out this AM and I tried firing the Harman up but would not cycle out of ignition right. Tried new ESP but still not right. Pulled the board to find a spider and nest between board and face plate. Now a carbonized bug. Trying to track down repairers.
 
Oh no! Hope you get it fixed
 
Status
Not open for further replies.

Similar threads

M
New Ashford25 insert. Peeling paint question.
Replies
11
Views
406
Blaze King
Tron
T
A
Enviro FPI running hot but not tripping switches
Replies
0
Views
50
The Pellet Mill - Pellet and Multifuel Stoves
arhyne
A
E
Ravelli RV100 burns for ten minutes then goes out, clean pot
Replies
10
Views
355
The Pellet Mill - Pellet and Multifuel Stoves
elizabethp
E
Don2222
Englander 25-PDVC / PDV wear plate cleaning in your burn pot for best performance.
Replies
0
Views
517
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
C
Paint curing smell still after 20+ burns?
Replies
2
Views
1K
QuadraFire
xman23
xman23
Top Bottom