Harman tl300 damper issue

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
S

Sgobeille

Member
Feb 6, 2013
4
I have had a harman tl300 for three seasons now. Once I bought it brand new my issue was the damper rod would fall past damper and would not shut tight. I have replaced damper rod three times. The damper 3 times. Where the damper ends meet the right side of clip is bent. The left side the clip constantly does not stay up right. This has been three years. Any one out there have the same problem. Helpppp
 
Status
Not open for further replies.

Similar threads

30WCF
Key Damper Theory
Replies
44
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
T-Rav
T-Rav
D
Proper Air Control & Throat Flue Damper Operation for an old Fisher Insert
Replies
1
Views
843
Fisher Stove Information, Parts, History and More
coaly
coaly
N
Damper and air supply experience and experiment - NC30
Replies
23
Views
2K
SBI: Century,Drolet,Osburn,Valcourt,Englander
weee123
weee123
DerrickH
Wood Furnace ducted into with Heat Pump and unsure of dampers
Replies
9
Views
1K
The Boiler Room - Wood Boilers and Furnaces
brenndatomu
brenndatomu
J
Harman or Quadrafire for my application?
Replies
2
Views
394
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
Top Bottom
Back