How does the inside of my stove look?

[Itslay90]

I just want to know how does everything looks?

 

[Ctwoodtick]

My non- pro opinion is that you look ok, from what can be seen in the pictures. I don’t see any cracks, which is good. Rust ( oxidation) happens due to heat in the firebox. How old is the stove?
Does it seem to run ok?

 

[Itslay90]

My non- pro opinion is that you look ok, from what can be seen in the pictures. I don’t see any cracks, which is good. Rust ( oxidation) happens due to heat in the firebox. How old is the stove?
Does it seem to run ok?

4 years, it runs great

 

[bholler]

4 years, it runs great

Looks extremely overfired but the patches look decent

 

[Itslay90]

Looks extremely overfired but the patches look decent

thanks

 

[Itslay90]

thanks

It wasn’t overfired,

 

[begreen]

It wasn’t overfired,

I think it was in the first year. We discussed the baffle distortion back then. Since then, with better operation, it has been run well by all reports.

 

[Itslay90]

I think it was in the first year. We discussed the baffle distortion back then. Since then, with better operation, it has been run well by all reports.

Thanks, how does the rails look? I been running it like this it’s a video

 

[bholler]

It wasn’t overfired,

Oh it absolutely was. You seem to have it under control now. But the inside of your stove looks used harder than most i see that are 20 years old.

 

[begreen]

The overfiring was evident with the first posting on this stove. The top paint clearly showed it had gotten too hot. Fortunately, these are tough stoves and burning habits have changed. That's all good. It should continue to burn well now for many years.

I

Thread 'I have a Pacific energy summit le'

Dec 16, 2022

I had this stove for a year, and it only gets my house to 65 degrees stove is in the basement, and I can’t get this thing to circulate the heat, I tried fans, I tried the blower nothing works, seems like all the heat is going to the ceiling, i added pictures of my this is my set up. Maybe someone can help me. Thank you. Oh. The stove temperature is 700 I have a liner in the chimney.

• Itslay90
• Replies: 57
• Forum: Pacific Energy

 

[Itslay90]

The overfiring was evident with the first posting on this stove. The top paint clearly showed it had gotten too hot. Fortunately, these are tough stoves and burning habits have changed. That's all good. It should continue to burn well now for many years.

I

Thread 'I have a Pacific energy summit le'

Dec 16, 2022

I had this stove for a year, and it only gets my house to 65 degrees stove is in the basement, and I can’t get this thing to circulate the heat, I tried fans, I tried the blower nothing works, seems like all the heat is going to the ceiling, i added pictures of my this is my set up. Maybe someone can help me. Thank you. Oh. The stove temperature is 700 I have a liner in the chimney.

• Itslay90
• Replies: 57
• Forum: Pacific Energy

Thank you did you see the video ?

 

[begreen]

That looks like a normal burn.

 

[Itslay90]

That looks like a normal burn.

Thanks

 

[Ctwoodtick]

Agreed the burn looks normal.