Anything I can try to get it working again. I have been manually lighting it by soaking some pellets in tiki oil and wrapping them in a paper towel. Whenever I need to scrape the burn pot its such a pain to relight
igniter stopped working in my tassman 40i
- Thread starter jtm4ug
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
JohnRXL
Member
My igniter went out on my Englander 25PDV and I just put a hand full of pellets in the burn pot and use a plumbers torch and light it that way. Works well instead of soaking the pellets with fuel. Leave the door open enough to get the nozzle of the torch in and when they start on fire close the door and the stove takes over from there.
Bioburner
Moderator
Is the igniter still glowing or just burned out now and need replacement? Igniter is accessed from the rear of stove after removing cover around the air intake according to manual.
- Status
Similar threads
