ISO Effecta 60kw combustion fan

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

NP ALASKA

Burning Hunk
Hearth Supporter
Feb 3, 2008
249
North Pole, ALASKA
Looking for a combustion fan for a Effecta 60kw wood boiler.

Any assistance is greatly appreciated

Effecta Dealer?
 
Looking for a combustion fan for a Effecta 60kw wood boiler.

Any assistance is greatly appreciated

Effecta Dealer?
Try using Chat GPT to find any info on the fan motor and any in stock that is tied to an online presence.
I used it to find a part for a Hyundai Excavator that no one had in stock that i talked to.
 
At one point, Tarm was selling Effecta boilers. They sold the business but the web address did not change. Check out this page and contact them to see if they have or can get what you need:


You might also be able to get one shipped from this web page (no idea if they are legit or not):


Obadiah's sold Effecta at one point in time. They might know something about parts:


This company says they still supply spare parts:

 
At one point, Tarm was selling Effecta boilers. They sold the business but the web address did not change. Check out this page and contact them to see if they have or can get what you need:


You might also be able to get one shipped from this web page (no idea if they are legit or not):


Obadiah's sold Effecta at one point in time. They might know something about parts:


This company says they still supply spare parts:

Thank you
 
Located and on the way
Thanks
 
  • Like
Reactions: brenndatomu
Tarm
 
  • Like
Reactions: OffGridICF
Did you know about the reset switch on the back? I overheated slightly yesterday on my third firing and figured the boiler went into idle mode. When it climbed back down the fan still didn’t come on so I wondered about settings.
Today I began troubleshooting power to my fan, thinking sitting at year without use in damp setting may have cooked it. Was about to take off the back panel when I removed the little, non-disclosed, black cap and saw a little button there. Pushed it with a screwdriver and, hey presto, fan🤦‍♂️. Back to regularly scheduled firing 😬
 

Attachments

  • [Hearth.com] ISO Effecta 60kw combustion fan
    IMG_4438.webp
    45.6 KB · Views: 7
  • [Hearth.com] ISO Effecta 60kw combustion fan
    IMG_4439.webp
    51.2 KB · Views: 7
  • Like
Reactions: salecker