Hello all, since last fall I've been asking questions about woodstoves. Well, we bought an Englander 30 a month ago and I finally finished the hearth install. I stuck with the manufacturer's minimum clearances plus one inch. I also put up wall shields for good measure. The hearth is constructed of 2x6's 12" OC trimmed in oak. The hearth pad is 3/4" plywood with 2 layers of Micore and a layer of Wonderboard cement board, then topped with porcelain tile. Overall the R-value ended up at about 2.3, exceeding the manufacturers 1.5 requirement.
I'm installing the pipe now, I have to build a chase through the 2nd floor. Anywho....check it out
!
(broken link removed)
I'm installing the pipe now, I have to build a chase through the 2nd floor. Anywho....check it out

(broken link removed)