I've been having problems with my Breckwell P24I. Main problem is fire going out and pellets continuing to feed causing a major auger jam. I've had the system thoroughly cleaned (professionally) and a service tech checked the timing of the auger and the rest of the stove's electrical stuff last Friday. After all that I still had the same problem. Bought some pellets from Lowe's today and the stove has been burning without problems for about six hours now. Before this it would have have jammed and shut down after about 45 minutes or so. I still think I'll have the door seals replaced also. For it to run the damper setting needs to be almost closed all the way. Any feedback or comments?