Stove was working fine when the flame started to get very big, and started become smoky and the pellet feed would start spill over the burn pot. I tried to recalibrate the feed on the control with no change to the feeding problem. Any suggestion on what the problem could be?
Pellets feeding to fast (Whitfield Profile 20)
- Thread starter Tom532
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Lake Girl
Moderator
Photo eye is either dirty or has malfunctioned. They can be purchased at Home Depot... May want to take the old one out to confirm #
http://www.mortonsstoves.com/wp-content/uploads/Profile.pdf
Honeywell Part number C554A http://www.homedepot.com/p/Honeywel...m-Sulfide-Flame-Detector-C554A-1463/203464518 $24!
Keep us posted..
.http://www.hearthtools.com/parts/photo_eye_test.pdf
http://www.mortonsstoves.com/wp-content/uploads/Profile.pdf
Honeywell Part number C554A http://www.homedepot.com/p/Honeywel...m-Sulfide-Flame-Detector-C554A-1463/203464518 $24!
Keep us posted..
.http://www.hearthtools.com/parts/photo_eye_test.pdf
Last edited:
heat seeker
Minister of Fire
Similar threads
