Two quick questions...

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

Kingdoc

New Member
Feb 23, 2015
29
Otsego county NY
One, Is it bad manners or would it be offensive to buy a stove from one dealer and buy the chimney from another dealer? I like my local guy he is good and knows what he is doing as far as chimneys and installs but he does not carry the stove I realy love. I would have to order the stove from a guy who I'm not completely happy with.

Second, How hot does it get in the ash pan? I don't think I would use the ash pan in a stove for ashes but I was thinking if it got to 225 or 250 degrees that's perfect for slow cooking ribs. well, if you can cook on a wood stove why not cook under it?

Thanks.
 
I think you're free to do whatever you want. You can spend as much on the chimney as a stove, or more. Don't know for sure, but I think more money is made on the install than the sale. If he doesn't sell the stove you want, he will probably still be happy to install it. If you aren't installing yourself, then you need to go with the guy you really trust.

Ash pans vary a lot in design. What stove are you looking at?
 
Not sure what temperature it was, but I ran my Jotul Oslo without the heat shield under the ash pan, and the slate tile underneath was pretty hot. As the pan fills with ash it will cool down a lot. The ash will work as an insulator. Youll have to empty the pan to cook those ribs.

+1 on the retailer doing the install. Im sure he wont mind hooking it all up. Im sure many people buy the stove they love at one shop, but down want them to do the install, and vise versa.

There is also the DIY install if youre up for it. Use caution though. Most stove makers will void your warranty if its not installed by a licensed professional.

Good luck with the new stove.
 
There is also the DIY install if youre up for it.
I beleave it will void my warranty and may not be up to code. Plus my wife says i'm not allowed to play with tools since the bathtub in the kitchen incident of 2003.
 
One, Is it bad manners or would it be offensive to buy a stove from one dealer and buy the chimney from another dealer? I like my local guy he is good and knows what he is doing as far as chimneys and installs but he does not carry the stove I realy love. I would have to order the stove from a guy who I'm not completely happy with.

Second, How hot does it get in the ash pan? I don't think I would use the ash pan in a stove for ashes but I was thinking if it got to 225 or 250 degrees that's perfect for slow cooking ribs. well, if you can cook on a wood stove why not cook under it?

Thanks.

1) Do whatever you want

2) Can you not find another stove you really love?
 
Most stove makers will void your warranty if its not installed by a licensed professional
no most stove manufacturers dont care as long as it is to code. Insurance companies are really the only ones who typically care.
 
I dream of a grease fire in the ash pan of my stove.
 
Wouldn't the ribs violate clearance to combustibles? ==c

Good point. I don't use the ash pan on the 30-NC for ashes but I do use it as a bread warmer. So far I haven't forgotten the rolls were in there.
 
I dream of a grease fire in the ash pan of my stove

Using proper cooking techniques this problem issue can be completely avoided. (google Alton Brown - Who loves ya baby back) I was a chef many years before my knees and back told me to find a nice office to work in. I figured, an oven is a metal box that gets hot and a clean ash pan is a metal box that gets hot.....
 
I spent lots of time with one dealer and found him to be very helpful but in the end he didnt deal with pacific energy stoves. I still wanted to give him my install business and purchase my wood stove from another just to say thanks for your time but they turned me down saying they would only install a stove that they supplied. I ended up buying my PE from a dealer and store that I quite liked and the other guys business is thriving quite well without me!
 
Using proper cooking techniques this problem issue can be completely avoided. (google Alton Brown - Who loves ya baby back) I was a chef many years before my knees and back told me to find a nice office to work in. I figured, an oven is a metal box that gets hot and a clean ash pan is a metal box that gets hot.....

And I have been burning in wood stoves for 40 years. In the interest of providing advice on this site that is safe, don't do it.
 
  • Like
Reactions: bholler
Plus my wife says i'm not allowed to play with tools since the bathtub in the kitchen incident of 2003.
Do you have a video of it you can post? ;lol;lol;lol;lol
 
Status
Not open for further replies.