Used pi for the first time in 20 years....

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
Apr 29, 2013
138
Goldstake, WA
I'm about 4³ feet short of 2 cords. Still need to toss a bunch on top for the slanted "roof" though.

[Hearth.com] Used pi for the first time in 20 years....


I split it all by hand over the course of 2 weekends, just in time to avoid 80+ "heatwave" here too.

Might start splitting more if it cools off next week. Otherwise i'll be enjoying the rest of my summer.
 
Nice work, but those splits are HUGE! Nice Doberman, also.;)
 
Thanks. I do a combo of large and small. We have a BK stove now and last year I found out it's easier to have a range of sizes so you can fill the box as much as possible. I have another stack in the shed of all of the smaller stuff. I usually lay down two big splits and then pile the smaller stuff on top. This is almost all pine, which seems to burn slower in bigger chunks anyway.
 
This is almost all pine, which seems to burn slower in bigger chunks anyway.

As far as I know, everything burns slower in bigger chunks (but of course it's more important with a fast-burning wood like pine).
 
Those splits look like the size I split my lodgepole pine but I also have some that would be bigger than that. Poochie looks proud of dads work!
 
  • Like
Reactions: privatejoker75
I'm guessing 5' high and 8' diameter as the numbers are close and the proportions look right.

cylinder volume = pi x 4 squared x 5 = 4 squared x (3.14 x 5) = 16 x (15.7)
2 cords = 4 x 4 x 8 x 2 = 16 x 16

difference = 16 x .3 = 4.8 cubic feet

If it ain't right it oughta be. Darn kids with their modern googles, why in my day that there google was a number.
 
I joked the splits were large because the dog was a Dobie at first glance. Swing and a miss...;lol
 
I'm guessing 5' high and 8' diameter as the numbers are close and the proportions look right.

cylinder volume = pi x 4 squared x 5 = 4 squared x (3.14 x 5) = 16 x (15.7)
2 cords = 4 x 4 x 8 x 2 = 16 x 16

difference = 16 x .3 = 4.8 cubic feet

If it ain't right it oughta be. Darn kids with their modern googles, why in my day that there google was a number.
I know, so much for formulas when you can just go to google and plug two numbers in and be done with it. Pi? What's that?

Oh and exactly right it's 5' by 8'. I was thinking about going 6' tall but then as i was building it realized it would be a pain to get the top wood back off when i need it.

I joked the splits were large because the dog was a Dobie at first glance. Swing and a miss...;lol

Lol, i thought that might have been the case at first, but then i started looking at the splits and there are some big ones in there :o
 
Um.. Pi are not round, Pi are square ;)
 
  • Like
Reactions: TreePointer
I joked the splits were large because the dog was a Dobie at first glance. Swing and a miss...;lol

Be assured that it was not wasted.:p
 
Is Pi still 22/7ths.?:rolleyes:
 
Status
Not open for further replies.