Woops... Harman P68 wing bolt

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

TheMightyMoe

Minister of Fire
Aug 2, 2012
596
Fairbanks, Alaska.
So... I get done cleaning, and notice one is missing for the igniter cover...

So I sift through my ash (Weee...)

Sift through my vacuum (Weee...)

Then do it again because I can't find the damn thing.

Right now stove is running with one bolt, and the cover is on tight.

I would feel better with another bolt, anyone know the dimensions of the bolt, so I can pick one up tomorrow without having to bring my stove down again.

Thanks,
Moe
 
its a 1/4-20, I beleive.....replace with a new wing nut, or heck, just a hex head......
 
wing bolts also come in 1/4-20...just offering you a quick fix!
 
Mine is a wing bolt not a nut.

Really, mine are wing nuts.

Actually, now that I think about it, I've never had them off, just loosen enough to remove the plate, so I don't really know what they are.
 
I did the exact same thing on Saturday. Found it in the hose of my shop vac after sifting through my ash can and looking under every piece of furniture.
 
I did the exact same thing on Saturday. Found it in the hose of my shop vac after sifting through my ash can and looking under every piece of furniture.

I feel your pain. Guys, please take pictures of your bolts / wing bolts / wing nuts, because on mine one is a bolt, and one is a wing bolt.
 
Status
Not open for further replies.