Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Hi, I have trouble to find out how to adjust the door of my stove. I will include pictures maybe it makes sends to somebody. The picture is from the top of the door but there is a same set up on the bottom of the door. Thanks for the help
Curious I don't see that on our stove. Your stove is one of the earliest off the line. I wonder if the allen screws are an adjustment? Are we looking at the bottom hinge pin here?
Curious I don't see that on our stove. Your stove is one of the earliest off the line. I wonder if the allen screws are an adjustment? Are we looking at the bottom hinge pin here?
Cornelis, just got up and looked, the door pin retention picture is different than mine. ? so possibly disregard the door fit essay I wrote.... I would still take off the right hand side cast panel and take a look from that angle.
Cornelis, just got up and looked, the door pin retention picture is different than mine. ? so possibly disregard the door fit essay I wrote.... I would still take off the right hand side cast panel and take a look from that angle.
Are you sure you have the dates correct? Madison got his stove in Sept 2008. I got mine in March 2008, though it was a showroom model from the Chimneysweep, so a fall 2007 model. I'm thinking you may have an early 2007 model and possibly one of the first off the line. The hinge pin definitely doesn't match mine. Those allen screws are not present at the top or bottom.
Are you sure you have the dates correct? Madison got his stove in Sept 2008. I got mine in March 2008, though it was a showroom model from the Chimneysweep, so a fall 2007 model. I'm thinking you may have an early 2007 model and possibly one of the first off the line. The hinge pin definitely doesn't match mine. Those allen screws are not present at the top or bottom.
That looks different. I think I found out how to adjust the door. I took of the right leg to get to the bottom allen screws loosen the top and bottom allen screws. I can move the door in place maybe not perfect but better than it was before but to be sure I have to wait till my girlfriend comes home I need a extra pair of hands. Somebody needs to hold the door while the other tighten the allen screws.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.