When I turn on my harmon52i on... The burnpot is filled with pellets and it pushes pellets in to my ashtray ...after heat gets going I will have that 1inch burnt ash from top of burnpot, but seems like the burnt pellets could have burned alittle more before being pushed out. I even tinkered around and made my feed limit down to 2.5 (from 4).
Yes I clean my unit, heat exchanger,burnpot, under burnpot. Burning lacrete softwoods.
I will say this, once my stove ran on empty, when I filled it with pelletes I had it on test mode for 60 seconds then placed it back on temp(per the manual, if ran empty, put in test mode). Feed limit was on 4. This is when it started to act up.
![6074127f8a34407ca0343255f34f9697.jpg 6074127f8a34407ca0343255f34f9697.jpg](https://www.hearth.com/talk/data/attachments/175/175724-25b1399e302b7cee192118efbcee38af.jpg)
Yes I clean my unit, heat exchanger,burnpot, under burnpot. Burning lacrete softwoods.
I will say this, once my stove ran on empty, when I filled it with pelletes I had it on test mode for 60 seconds then placed it back on temp(per the manual, if ran empty, put in test mode). Feed limit was on 4. This is when it started to act up.
![6074127f8a34407ca0343255f34f9697.jpg 6074127f8a34407ca0343255f34f9697.jpg](https://www.hearth.com/talk/data/attachments/175/175724-25b1399e302b7cee192118efbcee38af.jpg)