Handle on FPX
- Thread starter davo
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
maverick06
Minister of Fire
depending on which you have and what you mean, I might have a solution for you. Mine has the split doors (they suck). the door latch always has a little wobble in it, but if it isnt closing the door tight, the solution is washers.
There is a bronze looking latch on the inside which holds the door closed. Mine has a stack of washers behind it (factory) to control how tight to make it. If its lose, add a washer, problem solved. The nut on mine would always work its way lose. I had to use a little locktite, problem solved.
There is a bronze looking latch on the inside which holds the door closed. Mine has a stack of washers behind it (factory) to control how tight to make it. If its lose, add a washer, problem solved. The nut on mine would always work its way lose. I had to use a little locktite, problem solved.
Thank you but I have the single door. It still latches and is tight with the dollar bill test but I can move it right to left and it feels loose and sometimes doesn't
latch correctly.
That is what I have!
maverick06
Minister of Fire
Similar threads
