#need advice

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. M

    Is this stove worth repairing? Osburn 1800

    Hi, new to this forum! I just bought a house and it has an Osburn 1800 insert wood stove. First time in a house with a wood stove! By inspecting it, I found the baffle and one secondary air tube are missing. I also found that the top plate of the firebox is sinking near the middle. The depth is...
  2. S

    Advice on Replacing Gas Stove back to Fireplace or Wood Stove

    Hi All, I'm a noob to the world of fireplaces/wood stoves and need some advice on how to proceed. Recently bought an 1815 farmhouse in upstate NY that currently has a Heat & Glo LP stove in the fireplace that I'd like to remove. The house has forced air heat throughout, so this isn't the...
  3. J

    New to wood stoves & could use some advice!

    We just purchased a house that has an old, rusted out wood stove. We had it inspected, and it's absolutely unsafe to use. We live in Ohio and have 2 local dealers - one sells Vermont Castings and one sells Kuma. We're looking to heat our 1700sqft cape cod style home, nearly full time. There's a...
  4. B

    Need advice on insert sizing

    Hi all, first post but excited to join this wood burner community. In central Wisconsin looking to have installed a small wood burning insert, such as the Regency Alterra CI1150. My question is: even with this small unit would we be cooking ourselves in the living room? I’m in a small house...
  5. R

    Should I avoid a cat stove?

    Hi everyone, This is my first post and I have not read through the forum exhaustively (athough I have tried to read as much as I can!) so please let me know if this is repetitive. I have a bit of a saga here and I want to make sure I am drawing the right conclusions from it. First, the data...
  6. ReyPescador

    Wood Burning Insert advice

    Hey everyone, I'm looking at putting in a wood burning into our living room. I was ready to buy a 2008 Lopi Flush Mount on Facebook Marketplace, but I wanted to talk with a professional first. I went to our local store, and the salesman at the place I went strongly suggested against it, arguing...
  7. J

    Need Advice & guidance please! Jotul 602n rear 45° twin wall flue installation.

    Hi there, I'd massively appreciate any advice and guidance on an install I'm about to attempt of a jotul 602n into a small cabin (roughly 150 square foot) for occasional weekend use. For a few reasons I'm keen to not go straight up and through the roof so are hoping to do something like this...
    • Jamie J
    • Thread
    • #need advice guidance jotul 602n rear flue twin wall 45° installation twin wall through wall
    • Replies: 6
    • Forum: Jotul
  8. D

    Vermont Castings Defiant question

    Hello! I'm looking to get into the wood stove life and have found a used Vermont Castings Defiant that I'm hoping to purchase. Looking for some guidance on if this looks like a stove in good condition, and worth investing in. *I saw the Vermont Castings sub thread but wasn't sure if this...
  9. T

    Need advice on pellet stove

    I just purchased a new home and am interested in getting a pellet stove. The previous owners had a pellet stove, so we have the vents/intake needed. Here's where I ran into a problem. So, I am interested in getting a Harman stove, as that's the type stove I had growing up. It's been going strong...
  10. P

    Pellet Stove Problems....

    Hello Hearth.com! As my member ID states, Im new to the pellet stove community and I plea for your input / help with my situation. I am not new to stoves in general, have been burning wood for over 10 years but recently I inherited a pellet stove from a friend and installed in my shop. I knew...
Top Bottom
Back