My breckwell p24. 1991 manual circuit board seems to be working but when I hit the main switch to the off position the whole stove shuts off even combustion fan … fire still going. ….shouldn’t the exhaust fan stay on till fire out and cooled down ??
Breckwell p24 shut down not working
- Thread starter trush
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
ARC
Minister of Fire
Yes fan should continue until the low limit switch reads about 100 degrees. Switch is a Breckwell T22 110 degree low limit it is located on top of the combustion fan assembly. Check to see if it is damaged. Both the blower and auger switches are the same the blower switch is on the left and auger switch is on the right you could swap wires to each switch and see if blower continues to run when you shut down.
![[Hearth.com] Breckwell p24 shut down not working](https://www.hearth.com/talk/data/attachments/282/282122-3de87be61d4752a2da534988bfc652b3.jpg?hash=VcEzP-xWin "[Hearth.com] Breckwell p24 shut down not working")
usually when i replace those switches i do both at the same time. They are not expensive and your in their anyway
Similar threads
