Dutchwest Federal Airtight FA267CL

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.

Aussie Chic

New Member
Feb 2, 2016
2
Minot, Maine
Hey! Would like to find out a little more on this specific woodstove, such as burntime, how many square feet it will heat and if this was a decently rated woodstove. Thank you :)
 
G'day! Been a long time since I've seen an Adirondack! But they were similar to the other Federal airtights, and about the size of the Large Convection or 264ccl, which was far more popular. Nice medium sized catalytic stove. Probably do about 1500 sq. feet or better there in Western ME.

Problem is that those old Taiwanese made CDW's have vry few parts still available, so run it till it drops then just give it the boot. In othe rwords, when something serious goes wrong, you're up a gum tree.
 
G'day! Been a long time since I've seen an Adirondack! But they were similar to the other Federal airtights, and about the size of the Large Convection or 264ccl, which was far more popular. Nice medium sized catalytic stove. Probably do about 1500 sq. feet or better there in Western ME.

Problem is that those old Taiwanese made CDW's have vry few parts still available, so run it till it drops then just give it the boot. In othe rwords, when something serious goes wrong, you're up a gum tree.
G'day right back, thank you for the reply and for throwing in some Australian sayings lol. Loved it! After posting here I did a little more digging online and was able to find a manual. Thanks again. Cheerio ;)
 
I agree with the above, that parts may be hard and could be expensive. I would wonder what the condition of the refractory and catalyst are, and the general quality of the stove (no cracks, no signs of over-firing, etc). They can be good efficient heaters when used properly with a supply of seasoned (dry) wood.

The square footage listed on stove spec sheets are derived under ideal conditions, and the amount of area a stove will actually heat is quiet subjective.
A small stove may heat a medium sized tight and well insulated place, but for a poorly insulated place a bigger stove would be needed. Comparing firebox sizes is a better indicator of heat output when comparing stoves.

Good luck.
 
Been wondering all week how one finds one's way from down under to western ME of all places/! Well, happy heating, anyway.
 
Status
Not open for further replies.