Any idea what happened? It wasn't putting out decent heat on 1-4, so I put it on 5 and it ran away. So I turned down to 1, nothing changed, then the ESP light came on and the blower went to high speed and now I've turned it off. Brand new board and ESP. Maybe a month old. Once it cools off. I'll see what it does.
Esp light came on and blower turned it self up to high
- Thread starter Spaz
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
I just restarted it after it cooled off and unplugged it. It cleared the ESP code, so I'll see if it makes heat now. Started it on 2, it should get me 300f. It was 20-40f low per number. 1 was right on at 250 f before I turned it up. It's barely 275 now, should be low 300's, so not working. 🤮
Last edited:
Similar threads
