Firewood Storage Pictures

[mminor]

I finally got my wood shed built over the summer (picture attached). I had been planning it out for three years and finally it’s a reality. It’s a nice view out our back window - especially knowing that we have wood drying for the winters ahead.

It’s always cool to see the ingenuity and creativity of our members. I’m asking others to post a picture of their wood supply (pile, stack, rack, shed, etc) to this thread.

Thanks!
Matt

 

[black smoke signals]

 

[black smoke signals]

That’s either Jupiter or can’t remember south eastern pic.

 

[Trey1979]

Got most of it split

2018 drolet ht2000

 

[webby3650]

Baskets, just baskets. No stacking or sheds. It’s a real back saver!

 

[11ultra103]

I finally got my wood shed built over the summer (picture attached). I had been planning it out for three years and finally it’s a reality. It’s a nice view out our back window - especially knowing that we have wood drying for the winters ahead.

It’s always cool to see the ingenuity and creativity of our members. I’m asking others to post a picture of their wood supply (pile, stack, rack, shed, etc) to this thread.

Thanks!
Matt
View attachment 233451

Wow that is great! I hope to some day build something like that! For now my wood stays on pallets with a tarp over the top and halfway down the sides. Or inside the barn once it's been dried

 

[moresnow]

Baskets, just baskets. No stacking or sheds. It’s a real back saver!

I have 2 of these waiting to be used. I question how easy it will be to retrieve the bottom layers?

 

[webby3650]

I have 2 of these waiting to be used. I question how easy it will be to retrieve the bottom layers?

Easy, you just cut a few of the crossmembers out, leaving the top one for stability. Easy!

 

[vwmike]

After 5 years of tarps and having them blow off at least once a year finally built a decent shed! Got the roofing for free off a job site, which started the ball rolling, there’s a small cedar mill in town, and they where over stocked and got a great deal so built it all out of yellow cedar. Holds 4 cords.

 

[moresnow]

Easy, you just cut a few of the crossmembers out, leaving the top one for stability. Easy!

That makes sense!

 

[mminor]

Thanks Black Smoke - your wood on the right side looks dry, dry, dry! Nice work!

 

[PaulOinMA]

Nice shed!

I just have three Woodhaven Half Cord Plus racks behind the garage.

http://www.obxconnection.com/outer-banks-forum/forum-thread.aspx?Thread=103151

 

[rowerwet]

Made from plastic pallets I picked up free, the ends are the cage from a IBC tote, and the roof is my old oil tank cut in half.

Another cord without a real roof yet.
A few of my pallet racks are in the background , with steel roofing, or IBC tank roofing

 

[FaithfulWoodsman]

Not a sleek design, but it gets the job done. Pallet shed, holds two cords. Usually have to fill it once in fall and later in Jan. Everything else is on pallets under rubber roofing.

 

[Dobish]

how are these pieces staying, or did you capture them mid fall?

 

[FaithfulWoodsman]

View attachment 233503
how are these pieces staying, or did you capture them mid fall?

Hahaha. Found a couple in the stack that had been magnetized.
I think i found a couple longer splits that i could wedge those onto precariously. Your right it is funny looking.

 

[Woodsplitter67]

I start off like this

This gose 6 rows deep and ends up like this

nothing fancy. The pic above is one shed out of three. For a grand total of over 14 cords.

 

[Dug8498]

I start off like thisView attachment 233641
This gose 6 rows deep and ends up like this
View attachment 233642 View attachment 233643 nothing fancy. The pic above is one shed out of three. For a grand total of over 14 cords.

That’s a lot of wood!


Sent from my iPhone using Tapatalk

 

[Renovationman]

Nothing fancy like some of you guys but i don’t burn wood in the house. This is just for our outdoor fire pit and camping trips. Since this pic was taken I have burned all the left shed and have since filled it with trees from our property. It’s all cottonwoodwhich was dead standing. Total length is only 20’ and 4’ deep.

 

[Trey1979]

pecan

2018 drolet ht2000

 

[ohlongarm]

I finally got my wood shed built over the summer (picture attached). I had been planning it out for three years and finally it’s a reality. It’s a nice view out our back window - especially knowing that we have wood drying for the winters ahead.

It’s always cool to see the ingenuity and creativity of our members. I’m asking others to post a picture of their wood supply (pile, stack, rack, shed, etc) to this thread.

Thanks!
Matt
View attachment 233451

I finally got my wood shed built over the summer (picture attached). I had been planning it out for three years and finally it’s a reality. It’s a nice view out our back window - especially knowing that we have wood drying for the winters ahead.

It’s always cool to see the ingenuity and creativity of our members. I’m asking others to post a picture of their wood supply (pile, stack, rack, shed, etc) to this thread.

Thanks!
Matt Simple,10X12 X8 tall shed stacked to top,inside simple tubular rack.

View attachment 233451

 

[A1an]

Select the moisture content of your choice.

 

[JimBear]

I’ve got roughly 24 cord sitting around, Most of which was cut & split last winter. This was going to be our first year burning but after doing a lot of reading on here, I decided on new windows, doors & some insulation to help with proper stove sizing, so looks to be next year before we start burning, plus Mama Bear has to send some debris down the road to make space for the stove. Propane was $1.29 gal. on last fill so it’s not outrageous... “Yet”. I am keeping my eyes open for Black Friday stove sales, probably not likely but may as well look.

 

[FTG-05]

Strictly Amateur Hour here:

Pole barn:

Woodshed #1:

Woodshed #1 plus some this years wood:

This years wood to be processed:

 

[Dobish]

what model tractor is that?