Installing Harmon Absolute 63

[huffdawg]

Hello folks , I’m trying assemble the vent system for my Absolute 63 .. I purchased a Selkirk vent and the adaptor don’t fit, it’s 3 inch. Seems because the exhaust outlet on the back of the stove is cast it’s OD is too large . Anyone run into this problem?

 

[Washed-Up]

It took me quite awhile to find one...here’s where I bought mine

Selkirk EnergyVent Versa-Liner Flex Liner Adapters (PL3FCR/PL4FCR)

This is an official genuine part from Selkirk Corporation. The Selkirk Flex Liner Adapter allows PL Pipe to connect to a stainless steel flex liner

friendlyfires.ca

 

[huffdawg]

That looks like what I’m using.. maybe it’s different.. but it’s Selkirk

 

[Washed-Up]

Check the part numbers on it and compare

 

[huffdawg]

Check the part numbers on it and compare

623017 model SPV

 

[huffdawg]

Yes they are different .. thanx for the help

 

[huffdawg]

Ha, would have been nice to know lol. An actual adaptor for the Harmon.

 

[Washed-Up]

Even with the proper adapter I had to cut the top and bottom in a cm, coated the tailpipe with red rtv silicone and tightened the hose clamp down to seal it properly. Let us know how you make out.