Settings

[Camperjim]

What should the low fuel feed, low burn air, and air on temp settings be set on?

 

[CladMaster]

Errmm ! Need more info !

What stove ?

 

[DBCOOPER]

Probably depends on what stove you have...

 

[Pete Zahria]

What stove ?

Sounds like a "you know what"...

Dan

 

[Camperjim]

Errmm ! Need more info !

What stove ?

WARNOCK HERSEY 25-PDVC/ 55-SHP10 MADE AUG '01

 

[BrotherBart]

Warnock Hersey is the company that tested it for UL compliance. The stove is an England Stove Works Englander 25-PDVC. Search here for that stove and find more about those settings than you would ever want to know.

 

[Camperjim]

WARNOCK HERSEY 25-PDVC/ 55-SHP10 MADE AUG '01

WARNOCK HERSEY 25-PDVC/ 55-SHP10 MADE AUG '01

ENGLAND STOVE CO out of Virginia

 

[Bioburner]

Have you tried downloading a manual from Englander stoves?

 

[CladMaster]

OK, that stove ....

LFF = 5 or 6
LBA = 3 or 4
AOT = 1

This stove should also be in it's default mode, this being 'd'. More info on that in the link below.

https://www.hearth.com/talk/threads...burning-like-it-used-too.138866/#post-1865882

 

[Camperjim]

OK, that stove ....

LFF = 5 or 6
LBA = 3 or 4
AOT = 1

This stove should also be in it's default mode, this being 'd'. More info on that in the link below.

https://www.hearth.com/talk/threads...burning-like-it-used-too.138866/#post-1865882

Thank you, I will give this a try.