Sears Craftsman LT-1000 Carburetor Bowl leak around the solenoid!! What a gas smell!!

[Don2222]

Hello
It looks like a gas leak where the solenoid
I removed the carburetor and checked the solenoid. See video.
It seems to be working fine

Is there a good sealant that works with gasoline around the threads?
What is the best fix? See pics
I also heard that the solenoid really not needed and it can be disabled by cutting the stem off and disconnecting the wire? Anyone do that?

 

[Highbeam]

Just fix it. Verify it’s not just loose and if so, tighten it. Next, remove it and if it’s not a gasket, reseal the threads with any of the pipe dopes that are rated for gasoline.

 

[Don2222]

Just fix it. Verify it’s not just loose and if so, tighten it. Next, remove it and if it’s not a gasket, reseal the threads with any of the pipe dopes that are rated for gasoline.

Thanks, I found some dope good for oil so I will try that.

 

[blades]

Sol. is a fuel shut off device. Keeps your crankcase from filling up with gas if float sticks and during transport.

 

[Don2222]

Hello
I did order another carb just in case.
They are very inexpensive! $22.99 !!

Compatible Carburetor for Kohler CV492-27539 Command Pro Single Engine

Kohler CV492-27539 Command Pro Single Engine Carburetor Replacement

toolsmoito.com

 

[Highbeam]

Sol. is a fuel shut off device. Keeps your crankcase from filling up with gas if float sticks and during transport.

I added one to my Weber carb to stop dieseling. You know, running after you shut the key off.