dvl

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. W

    Install with Duravent DVL

    I am now in the process of installing my Stove and am a bit confused when it comes to connecting the DVL double wall pipe to the through the wall chimney kit and to the stove the first picture is all the pieces I received in the kit that seem to be for the connection to the chimney, I think I am...
  2. J

    How to (safely) connect tee to Duravent insulated wall pass through

    I finally got all the parts (hopefully) I need to install a glue liner in a masonry chimney. I went with DVL stove pipe and Duraflex liner. Since I’m going through a combustible wall to the chimney I purchased an insulated wall pass through...
  3. S

    DVL/Duraplus Chimney Installation retrofit for attic

    Hoping for some advice modifying my wood stove stove pipe/chimney installation! I have an existing install in a room with a "cathedral" ceiling. DVL (double-wall) goes from the wood stove to a ceiling support box (like this) near the peak of the roof, where it transitions to DuraPlus...
  4. J

    What do I need to pass through drywall into a flue liner in a masonry chimney?

    Hi all, we moved into a home with an old Vermont Castings Vigilant stove that we are replacing with a new Drolet Escape 1800 as well as the old single wall stove pipe and adding a flue liner. We are doing this ourselves because we had a chimney sweep guy come to clean out the chimney and inspect...
    • josey
    • Thread
    • chimney chimney adapter chimney pipe drolet escape 1800 duravent stove pipe dvl flue liner stove chimney connection help stovepipe telescoping chimney stove pipe
    • Replies: 12
    • Forum: The Hearth Room - Wood Stoves and Fireplaces
  5. H

    US woodstove to DVL double wall adapter NOT fitting

    Hi everyone. I'm using a US stove and the flue collar is supposed to be 6 inches so I got a dvk 6 inch stove pipe adapter to start my double wall stove pipe. The adapter slots into the flue collar so loosely that I measured it and the collar is actually about 6 1/8inch inner diameter. Am I...
  6. C

    8" duravent to dvl/double wall stove pipe install....

    hey! i'm stuck on my chimney install and after a few days waiting for tech support to get back to me, it's now the weekend and i don't expect they'll be calling back on a Saturday. has anyone here made the transition from chimney pipe to double wall stove pipe? the "finishing collar w/adapter"...
  7. S

    Baby Bear 6" not playing nice with Duravent "T"

    HI! I have been lurking on this forum for a while and found loads of helpful info thanks. I have not seen this item covered elsewhere: This is a new install. I have a rear-venting Baby Bear, 6" (6" outer diameter, 5 3/4" inner) which will not mate well with the double-walled Duravent DVL 6" "T"...
  8. Chamel

    Condar Flueguard thermometer installed in telescoping DVL?

    I finally got my pipes installed on my Sirocco 30. I'm excited! :) The last decision before I fire it up is should I install a condar flueguard thermometer. I'm still on the fence. The only thing stopping me is will smoke etc. leak around the hole in the pipe? It's installed in the living room...
  9. Chamel

    DVL Telescoping/Adjustable Pipe Minimum Overlap?

    Hi everyone! I received all my pipe and will be installing it to my Sirocco 30 this weekend. I have an adjustable piece of 12" DuraVent DVL pipe that might fit on my fixed length of DuraVent DVL. My question is what should be the minimum overlap between an adjustable piece and fixed piece? I...
  10. Chamel

    Sirocco 30 How connect stove collar to DVL Chminey?

    Hi everyone! My sirocco 30 just arrived! :) I'm trying to figure out how much pipe I will need but I'm having trouble fitting the DVL stove adapter to the stove collar. I tried fitting my adjustable 12'' piece of DVL and it fits really nicely to the bottom of the stove collar. So my questions...
  11. I

    DuraLiner and DVL to Progress Hybrid

    I asked about this at the end of my chimney thread here https://www.hearth.com/talk/threads/old-brick-chimney-line-it-fix-it-abandon-it.153506/, but I didn't get any traction, so I thought I'd make a separate thread out of it. We're putting a Progress Hybrid in our dining room. Given the size of...
Top Bottom