New Jotul 500 installed today (pic)

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  • Hope everyone has a wonderful and warm Thanksgiving!
  • Super Cedar firestarters 30% discount Use code Hearth2024 Click here
Status
Not open for further replies.
chanlon1974

chanlon1974

Member
Hearth Supporter
Nov 15, 2008
148
CT
Well I got my new Jotul 500 (blue/black finish) installed today and looking forward to doing the break in burns. Looks great in the fireplace. Very happy with everything. Also bought a Ariens 22 ton splitter and Ive been splitting/stacking wood for a few weeks a little at a time. Getting ready. Starting to cool off in CT. :)

[Hearth.com] New Jotul 500 installed today (pic)
 
Last edited by a moderator:
  • Like
Reactions: DTrain, Elle, velvetfoot and 7 others
My favorite finish. That's a handsome start to the season.
 
chanlon1974 said:
Also bought a Ariens 22 ton splitter and Ive been splitting/stacking wood for a few weeks a little at a time.
Click to expand...
If that is the wood you are planning on burning this season you will probably be pretty dissapointed
 
Nice !!


what kind of wood ?
 
That looks awesome, great stove and very nice fireplace. Did you install a block off plate? and what your wood supply looking like?
 
Great looking stove and fireplace! My Oslo has worked great so I am sure you will have similar results.

Just make sure you give your wood enough time to season.
 
First fire should be the crate it came in. Perfect break in temp.
 
Beautiful stove and hearth. You are gonna love that heater.
 
kennyp2339 said:
That looks awesome, great stove and very nice fireplace. Did you install a block off plate? and what your wood supply looking like?
Click to expand...
Thanks! No the dealer/installer didn't install one. I asked about it and they said it wasn't needed. Didn't really buy what he said, so I am thinking I might address that. He said it was blocked off at the top of the chimney and wasn't needed. I said what about the heat going up into the chimney, he said it would be minimal. My wood supply is about 2 1/2 cords right now. I have a friend that has more which i may get or I may just go with bio bricks for this year until the 5 cords I'm splitting now seasons.
 
Sure looks nice!
 
chanlon1974 said:
Well I got my new Jotul 500 (blue/black finish) installed today and looking forward to doing the break in burns. Looks great in the fireplace. Very happy with everything. Also bought a Ariens 22 ton splitter and Ive been splitting/stacking wood for a few weeks a little at a time. Getting ready. Starting to cool off in CT. :)

View attachment 162149
Click to expand...
That is a really nice stove. Congrats! I have an Ariens 27 ton, like it a lot, got it with 0% financing. Live on the border of CT. Did a small break in fire last night in my Encore, me and the dog flat out in front of the stove looking at the dancing flames. You will have some good burning with that beautiful baby.
 
Prichan said:
That is a really nice stove. Congrats! I have an Ariens 27 ton, like it a lot, got it with 0% financing. Live on the border of CT. Did a small break in fire last night in my Encore, me and the dog flat out in front of the stove looking at the dancing flames. You will have some good burning with that beautiful baby.
Click to expand...

Sounds awesome. Yeah I was gonna buy the 27 ton, but I needed the extra 500-600 for other things. So far the 22 has split everything ive put thru it no problem, even narly twisted stuff.
 
BrotherBart said:
Have a stove in a fireplace for ten years. Ya need it. Believe me. Ten bucks worth of sheet metal and an hours labor pays you back with heat forever.

https://www.hearth.com/talk/wiki/make-a-damper-sealing-block-off-plate/
Click to expand...

Yeah see that kinda irritated me that the installer said I didn't need one. His exact words were "its sealed at the top so you don't need one". I said yeah but what about the heat getting trapped up in the chimney. He said "it will be minimal and I wouldn't worry about it". I didn't know if you could just stuff some fire proof insulation up in there or do if you actually have to make a plate
 
chanlon1974 said:
Yeah see that kinda irritated me that the installer said I didn't need one. His exact words were "its sealed at the top so you don't need one". I said yeah but what about the heat getting trapped up in the chimney. He said "it will be minimal and I wouldn't worry about it". I didn't know if you could just stuff some fire proof insulation up in there or do if you actually have to make a plate
Click to expand...

I have a block off plate up inside the chimney where the tiles start. It's really there to hold the pour down insulation in place. Where the damper plate was I just stuffed fireproof insulation like you mentioned.
 
claydogg84 said:
I have a block off plate up inside the chimney where the tiles start. It's really there to hold the pour down insulation in place. Where the damper plate was I just stuffed fireproof insulation like you mentioned.
Click to expand...

So do you think I can get just stick some insulation up where the damper plate was or should I make a block off plate?
 
chanlon1974 said:
So do you think I can get just stick some insulation up where the damper plate was or should I make a block off plate?
Click to expand...

I have an 8" ovalized pipe coming through the damper, so there really wasn't all that much open space on either side to close off. How big of an opening is there in your case?
 
claydogg84 said:
I have an 8" ovalized pipe coming through the damper, so there really wasn't all that much open space on either side to close off. How big of an opening is there in your case?
Click to expand...

Its roughly about 12 inches on either side of the pipe.

[Hearth.com] New Jotul 500 installed today (pic)
 
Last edited by a moderator:
Status
Not open for further replies.

Similar threads

P
Smoke issue with brand new Jotul 500 Oslo
Replies
14
Views
2K
Jotul
Wisco Shepherd
Wisco Shepherd
A
Installing Jotul 500 Tightest to Masonry Chimney
Replies
15
Views
648
The Hearth Room - Wood Stoves and Fireplaces
avc8130
A
B
Old House/ New Install (help me)
Replies
36
Views
2K
Jotul
Ashful
Ashful
A
looking for installation advice on Jotul F 3
Replies
15
Views
3K
Jotul
alarminglee
A
M
Still smelling after 10-15ish fires Jotul 500
Replies
12
Views
2K
Jotul
mdcski2
M
Top Bottom