Start of my pellet stove

[Lake Girl]

Went with the wine

Couldn't have been a horrible day!

 

[jerl77]

Lol
Just finished the bottle
Turned out to be a great day.
Wish I had the pipe to fire this thing up

 

[jerl77]

Got the pipe i have been waiting for on saturday
and ITS WRONG AGAIN
I FEEEL BAD FOR THE PESON I GET ON THE PHONE MONDAY MORING !!
this is now the second time they sent me then wrong pipe
the invoice says the right one but the idiot that packed it i guess don't give a s!!t

 

[jerl77]

So question
I am installing a wall thimble
Cut the hole in the wall do I put insulation around the thimble that sit in the wall ?
Or do I leave I air gap in the wall ?

 

[Tails1]

So question
I am installing a wall thimble
Cut the hole in the wall do I put insulation around the thimble that sit in the wall ?
Or do I leave I air gap in the wall ?

Insulation, use roxul as it doesn't burn. You never want un insulated voids left in outside walls in a cold climate its a recipe for mold and condensation. Also seal the thimble plates inside and out well.

 

[Tails1]

Got the pipe i have been waiting for on saturday
and ITS WRONG AGAIN
I FEEEL BAD FOR THE PESON I GET ON THE PHONE MONDAY MORING !!
this is now the second time they sent me then wrong pipe
the invoice says the right one but the idiot that packed it i guess don't give a s!!t

What is wrong with the pipe they sent, was it the wrong size?

 

[jerl77]

So fill the void in the wall with that insulation right ?
I ordered a 36 inch pipe sent a 24 inch

 

[jerl77]

Was thinking about fill the space with the great stuff fire blocker foam

 

[Tails1]

Was thinking about fill the space with the great stuff fire blocker foam

Not sure what that is, it would need to be rated as non combustible.

 

[jerl77]

http://greatstuff.dow.com/product/fireblock.htm

 

[Tails1]

Not sure what that is, I have never used it. It would need to be rated as non combustible.

The data sheet on that product indicated it will burn if exposed to open flame or sparks. Now if there was open flame or sparks outside the thimble you got bigger problems anyhow. Not sure how to advise about using this. Personally I would go with the Roxul.

 

[jerl77]

Ok
I will get the roxul
That was easy lol
Thanks for all your help you guys and girls are making this very easy for me

 

[jerl77]

Any tricks for the thimble
Mounting on the outside
I have vinyl siding and was going to cut it and install j channel to make it look nice

 

[ohbix]

That's how mine is; J channel around the thimble, sealed w/ silicone. What stove do you have?

 

[jerl77]

Eglander 25 pvd

 

[jerl77]

Any pics ?

 

[jerl77]

Ok got all the pipe I need
Tomorrow is the big day
Cutting the thimble in and should have it fired up
Can't wait
Wish me luck

Pipe placed where it will sit

 

[rich2500]

Good luck, we want pics of ignition

 

[jerl77]

This is what it looks like outside right now
Lol

 

[rich2500]

perfect reason to get that puppy hooked up and running

 

[jerl77]

Ok thought the wall

 

[jerl77]

What do is seal this with

 

[Lake Girl]

My thimble came with a gasket. Since that is too old now, used numerous wraps of the high temp silicone tape to close off the opening. I didn't want to use RTV as I didn't want that much difficulty if I need to pull it.

 

[jerl77]

Ok here we go
All turned out well
Fired it up

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[jerl77]